Achieve maximum power from the R8 V10 without sacrificing driveability or reliability by optimizing the engine’s air/fuel ratios, timing, and more. We set out to extract maximum possible gains out of the 2017-2019 Audi R8 V10 while keeping the operating parameters safely within the confines of reliability and longevity.

Fabspeed Motorsport offers an alternative tuning method for vehicles equipped with ECU’s that traditionally required bench flashing. No longer do you need to remove your ECU and mail it in for a bench flash. The Handheld device interfaces with the OBD-II port on your vehicle and your computer to complete the tuning process, which is as follows.

POWER GAINS

While a vehicle equipped with bolt-on upgrades will experience maximum gains as a result of the increased efficiency of the engine, great power gains can be made on a completely stock vehicle!

R8 V10 PLUS: You can wake up your stock R8 V10 with this tune alone or pair it with our Valvetronic Exhaust System for maximum performance gains. In stock form, this tune adds an outstanding 46 whp and 41 ft/lbs of torque at 5650 RPM. When added to Fabspeed’s Valvetronic Exhaust, this tune will push peak power gains to 503whp and 411 ft-lbs of torque!

R8 V10 (NON-PLUS): We had a brand new R8 V10 (non-Plus) in house for dyno testing. we experienced max gains of 75 whp and 49 ft-lbs of torque at 8000RPM, and peak gains of 62whp and 29 ft-lbs of torque by adding our complete Performance Package with ECU Tune.

COMPATIBILITY

This tune is for 2017-2019 Audi R8 V10 models only

TUNING PROCESS

Read stock data on vehicle via OBD-II port with Handheld

Interface Handheld with software on your computer and send in data to Fabspeed Motorsport via email

We use this data along with information you provide about your vehicle to write a tune for your specific setup and email back your custom tune in 1-2 business days

Write the Fabspeed ECU Tune to your Handheld, then to the vehicle with the Handheld

Enjoy your increased performance!

No need to send your ECU in to return to stock – simply use the Handheld to flash back, then to your Fabspeed ECU Tune again at any point!

NOTES

Please review our Tuning Guide in the instructions above and email the ECU Tuning Information form to us. We utilize this form to ensure we meet your needs and consider your modifications to deliver the best possible results.

You must have access to a PC / Windows computer (Mac OS not supported) to upload your factory file information to us via email and in turn apply our ECU Tune to your Handheld device.

Upon sending us your vehicle information, our tuner will email you a custom ECU Tune(s) within 1-2 business days.

The Handheld device “marries” with your vehicle and can only be used on one vehicle.

TUNING GUIDE: Click Here