PRODUCT DESCRIPTION:

034Motorsport Performance Software for B8/B8.5 Audi S4/S5/Q5/SQ5 and C7 A6/A7 models equipped with the powerful 3.0 TFSI Supercharged V6 engine is flashed directly through your vehicle’s OBD-II port. 034Motorsports proprietary calibrations for the Simos 8 ECU safely and effectively increase the power output of the 3.0 TFSI engine. The result is a noticeable improvement in acceleration and throttle response, without any sacrifice in driveability or reliability.

034Motorsport’s 3.0 TFSI Performance Software was developed entirely in-house on 034Motorsport’s Development B8 Audi S4. The calibrations were then refined onmultiple enthusiast-owned B8/B8.5 Audi S4/S5 vehicles before release.

SIMOS 8.4/8.5 COMPATIBILITY:

This software is for use on Simos 8.4/8.5 equipped vehicles only and will not work on vehicles equipped with the CREC engine code (Simos 16). We advise customers, especially RoW, that if you are unsure of your engine code, please inspect your supercharger pulley. If you have a slip-on supercharger pulley, this software will work for you. If your upper Supercharger Pulley is attached with 4 bolts, it is a CREC engine code, meaning that this software will not work. For CREC equipped vehicles, please check out our software for your vehicle here:CLICK HERE

If you have any questions or concerns regarding your engine code before purchasing, please email our Tuning Support Team at sales@.

CALIFORNIA AIR RESOURCE BOARD AND EPA EXEMPT FILES:

034Motorsport Performance Software with California Air Resource Board (CARB) exempt Stage 1 files are available for on-road use under Executive Order D-850. 034Motorsport CARB exempt files are designed for residents of emissions-controlled environments and on-road use and are included free with the purchase of 034Motorsport Stage 1 Dynamic+ Tuning. 034Motorsport CARB exempt Performance Software offers the same great performance and reliability, now exempted from California Vehicle Code Section 27156 and the Federal Clean Air Act which prohibit modifications that increase motor vehicle emissions.

To receive your CARB Executive Order sticker, please fill out the followingFormafter you have completed flashing the CARB exempt tuning file to your ECU.

ADVANCED LAUNCH CONTROL

Once again, 034Motorsport has pushed the boundaries of what is possible for the 3.0T Supercharged engines found in many Audis through our Dynamic+ tuning! After extensive development and refinement by our world-class tuning team, all existing and future 034Motorsport tuning customers will have access to all Advanced Launch Control programs.

These features allow you to customize your desired launch RPM on the fly via your cruise control stalk, and run the intercooler pumps and engine fans at full speed below 10kph to allow for full cooling during staging prior to drag racing. This provides a large advantage over factory launching protocols as it results in the coolest possible IATs, and allows the driver to adjust their launch settings to be the most optimal for their conditions.

Note:For DL501/ZF8 equipped cars, a 034Motorsport TCU tune is required to use Advanced Launch Control. For vehicles equipped with a 6-speed manual transmission, a TCU tune is not required for Advanced Launch Control.

DL501 7-SPEED DSG TCU TUNE FEATURES

Flashed directly through your vehicles OBD-II port, 034Motorsports proprietary calibrations for the DL501 TCU safely and effectively raise the factory transmission’s RPM limiter, increasing the available powerband and allowing your car to make use of Stage 1, Stage 2, or Stage 2+ECU Performance ECU Software. The DL501 7-Speed DSG transmission is found in the B8/B8.5 Audi S4 & S5, and some ROW C7 Audi A6/A7s. 034Motorsport Performance DSG Software also increases the shift speed and optimizes the shift points in Drive and Sport modes for better performance and driveability. The result is a noticeable improvement in acceleration, without any sacrifice in comfort or reliability.

Features:

• Raised RPM Limit for Use with Stage 1/2/2+ Performance Software
• Compatible with Advanced Launch Control
• Optimized Shift Points in Drive & Sport Mode
• Increased DSG Clutch Clamping Force
• Improved Shift Speed
• Manual Mode Auto Downshift Disabled
• Raised Launch Control Counter Limit (From Factory 200)
• Flashed Directly Via the Factory OBD-II Port – No TCU Removal Needed!

AL551 8-SPEED ZF8 TCU TUNE FEATURES

Flashed directly through your vehicles OBD-II port, 034Motorsports proprietary calibrations for the AL551 TCU safely and effectively optimize its operation for Stage 1, Stage 2, or Stage 2+ Dynamic+ Performance ECU Software. The AL551 8-Speed ZF8 transmission is found in the B8/B8.5 Audi Q5/SQ5, C7/C7.5 A6/A7, and D4 A8. 034Motorsport Performance ZF8 Software also increases the shift speed and optimizes the shift points in Drive and Sport modes for better performance and driveability. The result is a noticeable improvement in acceleration, without any sacrifice in comfort or reliability..

Features:

• Raised RPM Limit for Use with Stage 1/2/2+ Performance Software
• Compatible with Advanced Launch Control
• Optimized Shift Points in Drive & Sport Mode
• Optimized Launch Control
• Improved Shift Speeds
• Flashed Directly Via the Factory OBD-II Port – No TCU Removal Needed!

ECU SOFTWARE FEATURES:

034MOTORSPORT 3.0 TFSI SUPERCHARGED SIMOS 8.4 & 8.5 PERFORMANCE SOFTWARE COMPARISON

*If you have an automatic or DSG transmission rev limiter increases in the ECU will not change your maximum shift RPM. To increase the shift points you need performance TCU software as well

**Some octane variants are fully developed but have not yet undergone our dyno data colection process and as such the peak increases and power numbers are not yet listed, but you can expect similar gains to the difference of the octanes we have provided the full data collection and dyno information for.

***All octane ratings are in US standard AKI (RON+MON). Some ROW countries such as the UK use a RON octane rating that differs from US Octane ratings. Please email [email protected] to ensure you are running the correct octane file for your area. Running the incorrect octane file for your fuel can result in irreversible damage.

034MOTORSPORT 3.0 TFSI SUPERCHARGED SIMOS 8.4 & 8.5 PERFORMANCE SOFTWARE STAGE DESCRIPTIONS

STAGE 1

034Motorsport Stage 1 Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 and C7 A6/A7 3.0 TFSI is engineered to safely increase horsepower and torque with no hardware modifications required. 034Motorsport’s proprietary calibrations increase boost by controlling the supercharger bypass, while optimizing timing and fueling maps to extract additional power from the 3.0 TFSI engine.

Stage 1 Performance Software features a higher redline of 7,200 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport’s engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttlemodulation. Stage 1 Performance Software also enables left foot braking, which allows for further control of thevehicle when driving on track.

034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 1 is available in 91 Octane, 93 Octane, 100 Octane, and 104 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER

STAGE 2

034Motorsport Stage 2 Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 and C7 A6/A7 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 1 levels with the addition of 034Motorsport’s3.0 TFSI Supercharger Pulley Upgrade. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport’s proprietary calibrations safely yield additional power from the 3.0 TFSI engine.

Stage 2 Performance Software features a higher redline of 7,200 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport’s engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttlemodulation. Stage 2 Performance Software also enables left foot braking, which allows for further control of thevehicle when driving on track.

034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2is available in 91 Octane, 93 Octane, 100 Octane, and 104 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER.

STAGE 2+

034Motorsport Stage 2+ Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 and C7 A6/A7 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 2 levels with the addition of 034Motorsport’s179or190mm Lower Pulley in addition to our upper pulley. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport’s proprietary calibrations safely yield additional power from the 3.0 TFSI engine.

Stage 2+ Performance Software features a higher redline of 7,400 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport’s engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttlemodulation. Stage 2+ Performance Software also enables left foot braking, which allows for further control of thevehicle when driving on track.

034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2+ is available in 91 Octane, 93 Octane, 100 Octane, 104, and E40 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER

034MOTORSPORT 3.0 TFSI SUPERCHARGED SIMOS 8.4 & 8.5 PERFORMANCE SOFTWARE DYNO CHARTS

Select Dyno Chart:— Stage 1 — 91 Octane —Stage 1 – 91 Octane – Crank Horsepower & TorqueStage 1 – 91 Octane – Crank Horsepower & Torque GainsStage 1 – 91 Octane – Wheel Horsepower & Torque— Stage 1 — 93 Octane —Stage 1 – 93 Octane – Crank Horsepower & TorqueStage 1 – 93 Octane – Crank Horsepower & Torque GainsStage 1 – 93 Octane – Wheel Horsepower & Torque— Stage 1 — 100 Octane —Stage 1 – 100 Octane – Crank Horsepower & TorqueStage 1 – 100 Octane – Crank Horsepower & Torque GainsStage 1 – 100 Octane – Wheel Horsepower & Torque— Stage 1 — 104 Octane —Stage 1 – 104 Octane – Crank Horsepower & TorqueStage 1 – 104 Octane – Crank Horsepower & Torque GainsStage 1 – 104 Octane – Wheel Horsepower & Torque— Stage 2 — 91 Octane —Stage 2 – 91 Octane – Crank Horsepower & TorqueStage 2 – 91 Octane – Crank Horsepower & Torque GainsStage 2 – 91 Octane – Wheel Horsepower & Torque— Stage 2 — 93 Octane —Stage 2 – 93 Octane – Crank Horsepower & TorqueStage 2 – 93 Octane – Crank Horsepower & Torque GainsStage 2 – 93 Octane – Wheel Horsepower & Torque— Stage 2 — 100 Octane —Stage 2 – 100 Octane – Crank Horsepower & TorqueStage 2 – 100 Octane – Crank Horsepower & Torque GainsStage 2 – 100 Octane – Wheel Horsepower & Torque— Stage 2 — 104 Octane —Stage 2 – 104 Octane – Crank Horsepower & TorqueStage 2 – 104 Octane – Crank Horsepower & Torque GainsStage 2 – 104 Octane – Wheel Horsepower & Torque— Stage 2+ (Dual Pulley) — E40 —Stage 2+ (Dual Pulley) – E40 – Crank Horsepower & TorqueStage 2+ (Dual Pulley) – E40 – Crank Horsepower & Torque GainsStage 2+ (Dual Pulley) – E40 – Wheel Horsepower & Torque

ECU TUNE SUPPORTING MODIFICATION REQUIREMENTS:

Click Here

034MOTORSPORT DYNAMIC+ END USER FLASHING KIT: