***ATTENTION! THIS PRECUT DOES NOT COVER THE ENTIRE TAIL LIGHT. THIS IS DUE TO COMPLEX CURVES MAKING THE INSTALLATION EXTREMELY DIFFICULT.***

Lamin-x BMW X3 (2018, 2019, 2020, 2021) Tail Light Film Covers. If you are searching for how to tint my tail lights, then this high-quality overlay product is the perfect solution.

Our products are made from high quality, adhesive-backed protective film that applies like an overlay directly onto the light. The films special adhesive allows for very forgiving installation. You can apply numerous times upon initial application to get it just right, and it can be easily removed in the future. Each kit is pre-cut to fit both the left and right tail lights.

Tail Light Kit Includes

• Film for tail lights on both sides of your vehicle
• Installation tools: spray bottle, squeegee, and trim tool.
• Installation instructions

Features

• Transparent film that adheres onto your tail light
• Glossy finish for high-quality look
• Precut for both sides of your specific vehicle
• Includes DIY tools and installation instructions
• Made in USA, 5-year warranty, industry-leading product

Read our California Prop 65 Warning

Color Options

Tail Light Tint Film Color Options

• Tint: A light tint film for your tail lights that tones down the red. Adds a sleek look to your tails.
• Gunsmoke: A medium tint for your tail lights. A darker and more bold tint that our Tint film.
• Smoked: A medium-dark tint for your tails. Smoked has a slight brown hue compared to our Gunsmoke film.
• Charcoal (8 mil Thickness): Charcoal is our black-out tail light option. If you want to black-out your tails, Charcoal is for you.
• Red (8 mil Thickness): Our Red film is designed to give your tail lights a consistent red look, even if there are large clear sections.

FAQs

How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 1-3 workday’s processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.

Can I install this myself? Yes, you can install Lamin-x yourself. These applications are normally low difficulty installations. A few applications with a 3, 4, or 5 level difficulty will require some acquired knowledge and mechanical ability in which we cannot be held accountable. Therefore installations are done at your risk. We provide you with installation instructions, tools, and website videos. If you are not comfortable with the installation, you can use our Dealer Locator to find a local installer. If you attempt the install yourself and have any questions, contact us at 706-955-0677 or [email protected].

How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 2-4 workday’s processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.

What is your warranty? We have a Five-Year Warranty on our products. If you want more information please visit our warranty page .

What do I do if I find fogginess, air or water bubbles, surface texture, or scratches after my Lamin-x installation? Once the film fully cures, most imperfections will disappear completely. After time, small scratches, trapped moisture, and most bubbles will dissipate on their own. However, if you encounter a stubborn bubble, you can poke it with a sewing needle and push out the air or water. The hole will eventually close on its own.

How do I remove the film from my lights? To remove the film, we recommend warming it with a heat gun, hair dryer, or simply by parking the car in the sunlight on a warm day. While the film is warm, slowly peel the film from the lens surface. Any adhesive that may be left on the lens can be removed with a cleaner that is safe for use on your vehicle’s exterior.

Are these films legal in my state? Our colored films may not be legal for street use on a vehicle’s primary lighting, and, as such, are sold with an off-road use disclosure. Please check your state or local laws before installation. Application of colored Lamin-x film on your primary lights is done so at your own risk.

Installation

Difficulty Level:3/5 Installations with this level difficulty need a little time a patience when installing. Extra care is required to help with alignment and getting the film to lay down.

Watch our installation video for more info: