Audi A3 (2017, 2018, 2019, 2020, 2021) A-Pillar & Cab Top Paint Protection. Paint scratches or damage on the A-Pillars and Cab Top edge areas are easily avoided when using this paint protection.

This invisible film is designed to protect your paint, but not alter the look of your car. It is 8 mils thick and has a glossy finish. The material is made right here in the USA by the world’s leading paint protection manufacturers.

We custom pre-cut the kit to fit perfectly for your vehicle for easy peel and stick installation. We also include the installation tools and instructions needed to assist you with the install process. Order today!

Kit Includes

• One paint protection piece to cover the a-pillars and front edge of your roof.
• Installation tools: spray bottle, squeegee, and trim tool.
• Installation instructions

Features

A-Pillar and Cab Top Protection Features

• Protects against rock chips, sand-blasted, or scratches
• Custom cut for the front facing areas of your a-pillars and cab top
• Transparent protection film that adheres onto your paint
• 8 mils thick with high gloss, scratch resistant surface
• Includes DIY instructions and tools, Made in USA, 5-year warranty

Installation

Difficulty Level: 3/5 Installations with this level difficulty need a little time a patience when installing. Extra care is required to help with alignment and getting the film to lay down.

FAQs

What is the difference between Lamin-x kits and other products I find? Our kits are made of the exact same material with high-quality, strength, and warranty that you will find for clear bra paint protection. We focus on providing these high-quality products at a great price and with tools for you DIY customers to install them easily and successfully.

Can I install this myself? Some precuts are low level difficulty installations that can easily be installed by the DIY customer, and some are higher difficulty that are best installed by professionals. Please see the installation difficulty rating on this product prior to ordering. However, higher level installations can be done by those customers who are mechanically inclined, patient, and have an extra person for help with handling the large pieces of film. We include website videos, installation instructions, and application tools with your order. If problems or questions arise during your installation, you can contact us at 706-955-0677 our customer service associates would be happy assist you.

If I have the film installed by a professional, how much will it cost? The cost for installation varies per shop. Since each shop has their own rates and will install at different speeds, it is difficult to estimate installation cost. Make sure to contact your local dealers to get a quote for the install before purchasing or installing.

How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 2-4 workday’s processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.

What is your warranty? We have a Five-Year Warranty on our products. If you want more information please visit our warranty page.

What do I do if I find fogginess, air or water bubbles, surface texture, or scratches after my Lamin-x installation? Once the film fully cures, most imperfections will disappear completely. After time, small scratches, trapped moisture, and most bubbles will dissipate on their own. However, if you encounter a stubborn bubble, you can poke it with a sewing needle and push out the air or water. The hole will eventually close on its own.

How do I remove the film from my paint? To remove the film, we recommend warming it with a heat gun, hair dryer, or simply by parking the car in the sunlight on a warm day. While the film is warm, slowly peel the film from the paint surface. Any adhesive that may be left on the paint can be removed with a cleaner that is safe for use on your vehicle’s exterior. We recommend using Goo Gone or bug and tar remover.

How to I take care of the film after install? You can find information on care instructions on our maintenance care page.