HIGHLIGHTS

Gain up to15hp/15tq Improves Turbo Spool Increases Intake Sound Integrated Heat Shield Massive 4″ IntakePipe Ideal for Tuned Engines Supports Hybrid/Upgraded Turbos SAI Filter Included45 Minute Installation

PROFILE

The ARM MK7 GTI/GOLF R Intake Kit was designed to increase airflow on your 2.0T by removing the stock intake restrictions. Upgrading to the ARM MK7 Intake allows your 2.0Tto produce more power and torque throughout the RPM range, especially at higher RPM.The ARM MK7 Intake is ideal for tuned IS20, IS38, and upgraded turbo-equipped 2.0T’s.

CONSTRUCTION

The ARM MK7 GTI / GOLF R Intake features aclass-leading 4″ inlet size at the air filter to maximize airflowfor even the most demanding builds. The ARM intake tube is built as asingle piece of 6-layer reinforced siliconefor a seamless transition to the 2.75″ stock turbo inlet or theARM MK7 Turbo Inlet. The solid construction of the inlet tube allows it to maintain its geometry during the most aggressive driving.

Installation of the ARM MK7 GTI / Golf R Intake willopen up the sound of your turbo and enhance the intake sounds of your 2.0T. You can expect to hear significantly increased volume of your turbo spool on acceleration, as well as a very audible venting of air when letting off the throttle.

Included with the ARM MK7 GTI / GOLF R Intake kit is ourheat shield finished in textured blackand designed to fit the factoryair duct perfectly. This is ideal if you plan to run a modified factory air duct. The connecting pipe between the air filter andintake pipe is welded into the heat shieldto allow for a seamless design, minimizing areas for engine bay heat to sneak past the heat shield, keeping the cool air and engine bay heat separated as much as possible. The connection pipe has a tap for the reinstallation of the factory vacuum line. The heat shield is complete with soft rubber trim around the upper edge to create a snug seal with the hood, minimizing exposure to engine bay heat.

The air filter in the ARM MK7 Intake Kit utilizes an inverted design to maximize surface area. Combining the inverted filter design with the massive5.5″ base gives youover 300 cubic inches of filter surface area.

The ARM MK7 Intake comescomplete with an integrated SAI Filterwhich installs directly into the heat shield, allowing access to cooler air for the secondary air intake.

IN THE BOX

ARM Dry Air FilterARM Reinforced Inlet TubeARM Textured Black Heat ShieldARM SAI FilterMounting Hardware